Camburg Engineering 89-97 Ranger 4x4 High performance off road suspension

1989-97 Ranger / Explorer 4x4

Entry Level Performance Off-Road System
5" Lift
10" Travel
$1650 Parts
$2500 Installed
This system if for mild off-road use. Will clear 31" tires.

Cut and Turned Beams
Custom Radius Arms
Eibach Coil-Springs
Bilstein Shocks pr.
Cam Kits
Brake lines

Performance Off-Road System
5" Lift
13" Travel
$2700 Parts
$3700 Installed
Add $550 for transmission x member heim arms.
This system is for medium off-road use. Will clear 31" tires.

Cut and Turned Beams
Custom Radius Arms
Custom Coil-Buckets
Sway-A-Way 2.5 shocks
Camburg/Eibach coil-Springs
Limit Straps
Bump Stops
Cam Kits
Brake Lines

Extreme Performance Off-Road System
5" Lift
16" Travel
$4800 Parts
$5800 Installed
Add $1500 for custom axles
This system is for medium off-road use. Will clear up to
32" tires. This system is the same as the performance
off-road system but with custom I-beams.

Custom 4x4 I-Beams
X-member Heim Radius Arms
Custom Coil-Buckets
Sway-A-Way 2.5 shocks
Camburg/Eibach coil-Springs
Limit Straps
Bump Stops
Cam Kits
Brake Lines

Long travel coilover offroad suspension
4-6" Lift
up to 21" Travel
$5600 Parts
$7100 Installed
Add $500 for Sway-A-Way Air bumps and Cans.
Add $1500 for custom axles.
Pictured with optional by-pass shocks.
This is an extreme system for pre-run or race. This
is the same system used by many racers and has
earned 1st place points championships!

Custom 4x4 I-Beams
Heim x-member Radius Arms
Coil-Over mounts
Sway-A-Way 2.5 coil-overs
Eibach Coil-Springs
Limit Straps
Cam Kits
Brake Lines

Rear Suspension Options

Deaver Springs
$450
#31 Pre-runner pack
#23 Long Pre-runner pack.
#23 must use Custom Shackles.

Ranger Shackles
$225 Tig welded
$150 Mig welded

Tig welded

Mig welded

1989-1997 Ranger Rear shock mount / bed cage.
This is a kit and can be shipped ups. This system is fully bolt on!
$900.00 parts
$1100.00 installed
Shock sizes.
Sway-A-Way 2.5"            16"
Bilstein weld top 60mm 16"
FOX 2.5"                        14"
King 2.5"                        14"

Cutting a hole in the bed is necessary! These shackles
will not fit under the bed of a truck! These are designed
for race trucks that do not use the factory bed.

3 Link off-road systems
start at $3000 parts.
Call for details.

Custom Radius Arms
4 Wheel Drive $650.00
Used in our entry level kits and on race trucks these
Camburg Custom radius arms have won championships
and proven to go the distance on pre-runners through
Baja.

Cut and Turned 4x4 I beams
$550 Core required.
These beams are modified for off-road use. They are cut and turned for
proper camber alignment. They will require porting for the axles to clear
in use with long travel trucks. Designed to work with stock axles.

Heim Joint, Transmission Cross member
4 wheel drive $1100
f you are looking for the absolute best performance
these are the arms for you. These arms are not for
pavement pounders. These are for pure off-road high
speed race and pre-runners. These are the same arms
used by the Camburg/Lucas unlimited ranger.
Constructed with 1.750 top and bottom tubes, laser cut
plates, and 1.250" Heims. All that plus a full dimple died
box structured tranny X-Member

Custom wider 4x4 I-Beams
Core exchange Dana 35 (Ranger) and Dana 44 (F-150/Bronco)
Requires custom axles. If you are looking for the ultimate in 4x4 I-Beam
performance you have found it. lengthened 4" per side, plated in on all sides.
Full hard facing with lower rock guards front and bottom. 1" mono balls at the
pivots with 17-4 stainless steel spacers.
$1800 non trussed
$2400 with truss (pictured)