2.0 Coil-over Remote Reservoir
  • Smooth bore seamless alloy body.
  • CAD designed pistons-high flow, low cavitation, tunable, velocity sensitive valving. Hard anodized
    aluminum.
  • Teflon lined steel spherical bearings.
  • Shafts are hardened 17-4 stainless steel 5/8 or 7/8" hard chromed.
  • Billet aluminum body caps/eyelets.
  • Clear cadmium body plating (Chrome optional)
  • Emulsion shocks must be run body side up. Reservoir shocks can be run at any angle.
  • Nitrogen gas pressurized to 200 psi.
SPECIFICATIONS;
Mounting dimensions: 1/2" bolt diameter 1 1/4" wide. Optional spacers for 1 1/2" mounting width or
bushings for a 5/8" bolt diameter.
Hoses: 5/8" shaft = -5 x 12" 7/8" shaft = -8 x 14"
Options: Emulsion, Remote reservoir, or billet piggy-back (360deg adj)
Owners manual
Valving Specifications
2.0 Coil-over Emulsion
        
Description
 Shaft dia
 Res Length
 Ext Length
 Col Length
 Travel
3.5 c-o Remote res
 0.625
 2.0 x 8
 13.10
 9.65
 3.45
5.0 c-o Remote res
 0.625
 2.0 x 8
 16.40
 11.30
 5.10
6.5 c-o Remote res
 0.625
 2.0 x 8
 19.35
 12.85
 6.50
8.5 c-o Remote res
 0.625
 2.0 x 8
 23.35
 14.85
 8.50
10.0 c-o Remote res
 0.625
 2.0 x 8
 26.65
 16.65
 10.00
10.0 c-o Remote res
 0.875
 2.0 x 11
 26.10
 16.15
 9.95
12.0 c-o Remote res
 0.875
 2.0 x 11
 31.10
 19.15
 11.95
14.0 c-o Remote res
 0.875
 2.0 x 11
 35.10
 21.15
 13.95
16.0 c-o Remote res
 0.875
 2.0 x 11
 40.10
 24.15
 15.95
18.0 c-o Remote res
 0.875
 2.0 x 11
 44.10
 26.15
 17.95
Application guide
2007 Scott's Motorsports Performance
P.O. Box 512
Clearfield, Utah 84089

Terms of use, Privacy policy. Shipping. Returns. Warranties.
Hosting by Yahoo! Web Hosting